| • | Standards: IEEE802.11g, IEEE802.11b, IEEE802.11d, IEEE802.3, IEEE802.3u, IEEE802.1X, WPA, WMM, IPv4, IPv6 |
| • | Wireless: 802.11g/802.11b Compliant; Operation Channels: Ch1~11 for N. America, Ch1~14 Japan, Ch1~13 Europe (ETSI) |
| • | WMM: WMM (Wi-Fi Multimedia) support; MAC Access Control; RADIUS Setting: Required in Radius with 802.1x, WPA, WPA2 mode |
| • | Guest Account: Provide a second SSID for wireless access in Gateway mode |
| • | Receiver Sensitivity: -95±1dBm@1Mbps, -85±1dBm@11Mbps, -73±1dBm@54Mbps; Antenna: 2x internal IFA antennas, Gain in 1.25dBi |
| • | Ethernet Port: 1 x RJ45 for 10/100 BaseT; Support Ethernet and 802.3 with max. bit rate 10/100Mbps and auto cross-over function (MDI-X) |
| • | Infrastructure Mode: AP Only; WDS; Hybrid; Client; URE; AfterBurner; BroadRange |
| • | Port Trigger: Open certain TCP or UDP ports to communicate with the computers connected to WL330gE |
| • | Power: AC input- 100~240V(50~60Hz); DC output- 5V with max. 1A current; Reset Button: Push for 5 seconds to restore factory setting |
| • | Range: Indoor 130ft (40m), semi-open 330ft (100m); Outdoor (LOS, Line-Of-Sight); 1500ft (457m) |
| • | SSID Isolation: Support SSID hiding; Wireless Separation: Prevent wireless clients from communicating with each other |
| • | Transmit Power: 11b- 19±1.5 dBm ; 11g- 17±1.5 dBm at nominal temperature |
| • | Utilities: Device Discovery, support XP, 2000, Vista; Firmware Restoration, support XP, 2000, Vista |
| • | Virtual DMZ: Expose one computer to Internet, so that all the inbounds packets will be redirected to the exposed computer |
| • | Wi-Fi Security: 64/128-bit WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise, Radius with 802.1x |
